There are numerous techniques by which TIG Welding can be carried out. Of these the primary ones are the Walking the Cup and the Freehand TIG. This content will recognize the advantages and disadvantages of each strategy.

The doubt that every welder has is which strategy would be the best – Freehand or the Walking the Cup?

According to me the response is simple. In order to become experts in their field, all welder need to become proficient in both strategies.  It is as if chalk and cheese are being compared!

Why so?

The grounds for my response is again simple – in the business of welding, welders’ will be challenged with circumstances where one strategy will offer a better outcome when opposed to another.

A perfect example for it is TIG pipe welding inside a fabricating outlet. In this scenario, Walking the Cup technique generates quick and reliable outcomes. For those welds that are required to be performed on a project site, the Freehand strategy would be a sure winner.

If you happen to be well versed in the technique of Walking the Cup TIG Welding, you can make use of this for the onsite tasks. For sure, when this technique is performed by a skilled professional, it is quite an impressive sight to check out. If case the circumstance requires you to go ahead with the Freehand technique, then if is fine that you go on with it. So depending on the situation, you should be well versed in both the techniques if you want to be successful in TIG welding, more so, if you happen to be holding a well paid job in the welding industry.

Walking the Cup technique has proved to be most effective for tube joints which are 2” and above.  It is ideally suited for most electrical sockets including for those that are just 1 inch in dimension.

The Freehand strategy can be utilized when welding other items other than piping whereas Walking the Cup technique is tailored particularly in the welding of pipes.

When we talk about Freehand technique, we should not conclude that it is about utilizing the torch minus something for it to rest it on. It just means that the ceramic cup does not supported on the steel. By relaxing the arm against the steel, it holds it steadily.

The most dependable way to produce quality welds is through TIG welding.

To generate a fair looking TIG weld, a welder is required to sustain a limited arc, which can’t be achieved if the hands are not steady. Remember and be sure that you keep on practicing and practicing so that you can become skilled in both these TIG weld strategies.