250 Amp 220V MIG/FLUX Welder (Spoolgun Capable)
Longevity's MIGWELD 252 provides users an exceptional industrial grade welder while at the same time being user-friendly and easy to set up. The MIGWELD 252 delivers portable welding that allows the versatility to weld various steel thicknesses without conceding the excellent quality that is expected in the Longevity products. The MIGWELD 252 uses a simple, user-friendly interface that allows quick and precise adjustments that fulfill the requirements to any welding job you may come across.
Introduction
Longevity's MIGWELD 252 provides users an exceptional industrial grade welder while at the same time being user-friendly and easy to set up. The MIGWELD 252 delivers portable welding that allows the versatility to weld various steel thicknesses without conceding the excellent quality that is expected in the Longevity products. The MIGWELD 252 uses a simple, user-friendly interface that allows quick and precise adjustments that fulfill the requirements to any welding job you may come across. Longevity uses industry-leading IGBT inverter technology which makes this unit more lightweight and potent than other welders using outdated technology. The MIGWELD 252 comes with full amperage and 2-speed adjustments for faster or slower hand speeds on thicker or thinner material in addition to the pulse setting.
Longevity also gives the user the option of using gas shielding which allows for the welder to attain the best-looking welds! Thanks to using a Binzel MIG gun and industrial grade rollers in the feed system, the MIGWELD 252 gives the user the ability to choose a wide variety of wires! All while covered under a 3* year industry leading warranty!
Easy Set Adjustment
The MIGWELD 252 is very user-friendly! All the adjustments are grouped and coded together which allows for easy on-the-fly adjustments. This system allows the user to see the settings quickly and make necessary adjustments easily, allowing the welder to more efficient in the workspace.
Digital Amp and Volt Meter
The digital output panel allows the user to see the settings quickly and accurately. By using a digital display Longevity allows the user to fine-tune the MIGWELD 252 for faster and repeatable settings without the guessing involved on most analog units.
Powerful, Reliable, Efficient IGBT Technology
Longevity offers cutting-edge technology in the MIGWELD 252 by including IGBT semiconductors inside this unit. IGBT technology makes this unit more reliable than other comparable units using old-fashioned technology. By using IGBT components, Longevity is able to offer a potent welder that is lighter and more space-efficient than its outdated counterparts.
Easy Setup
Longevity equips the user with high-quality Trafimet MIG or a Binzel MIG guns as an option to suit all users' demands. Implementing Euro-style connectors allow you to attach your favorite MIG welding guns, including Bernard. The setup of the MIG torch is so simple and easy that you will be burning through the wire in no time.
Industrial Grade Duty Cycle
The duty cycle of the MIGWELD 252 is set at the industrial grade standard of 60%. The MIGWELD 252 is ideal for light industrial use or for those with fabrication uses.
Digital Amp and Volt Meter
By using digital meters, Longevity gives the operator instantaneous outputs which are easily read while welding. This allows the user to dial-in their favorite settings accurately, again, and again!
Thermal Overload Protection
If you are welding for a long period of time and your duty cycle limit is reached, Longevity’s thermal and overload protection will kick on safely shutting down your machine for proper cooling avoiding any damage. Once the machine is cooled, you will be able to go ahead and continue welding.
Burn Back Control Advantage
Longevity uses Burn Back Control to prevent excessive amounts of wire from sticking out by providing extra arc time without feeding. This allows the user to make excellent re-starts as smooth and painless as possible.
Advantages of the Spool Gun
With the Longevity spool gun, you are able to efficiently and economically weld aluminum, stainless steel, and other metals! A great option for those who need to weld aluminum for the beginner or professional.
Larger Wire Spool Capacity
Longevity understands the importance of time and money. With this MIGWELD 252 MIG Welder, you are able to use 44lb spools for longer welding times without having to change the spool. This also saves you money as you are able to buy larger spools at greater discounts. Do not need to use that much wire? No worries. You are able to use small 2lb rolls of wire without additional equipment.
Quick Cable Attachments
Longevity by using DINSE Euro connectors gives the users total versatility due to it being compatible with most aftermarket torches. Setup time is also reduced due to the quick connect argon couplers. Fast and Easy!
Auto Post Flow
Auto Post flow on the MIGWELD 252 will automatically pass 2 seconds of gas through your torch to safely and efficiently cool your torch. This also allows the user to shield the fluid puddle until it cools down.
Specifications |
|
||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product # | 444623 | ||||||||||||||||
Warranty | One year Warranty on parts and labor. Please see Longevity Terms and Conditions for detailed warranty information. |
Tig
-
TIGWELD 250EX PART 2-TIG
-
TIGWELD 250EX PART 1-STICK
-
OVERHEAD TIG WELDING TECHNIQUES
-
LONGEVITY TIGWELD 200i - 200 AMP DC TIG STICK WELDER REVIEW AND SETUP
-
Longevity Tigweld 200D-Setup & Review (200 AMP DC Tigwelder)
-
Longevity TIGWeld 200SX Review | TIG Time
-
Lincoln Invertec V205-T Vs. Longevity Tigweld 200EX
-
DiResta The Which Blade
-
HOW TO MAKE A COMPRESSOR MANIFOLD
-
TIG WELDING COPPER TIPS AND TRICKS
-
Tig Tungsten Diameters Explained
-
temper plate project video tigweld 200i
-
LONGEVITY TIGWELD 200D SETUP AND REVIEW - 200 AMP DC TIG WELDER
-
MAKING A CUSTOM METAL LAMP SHADE BY WELDING WITH A TIG WELDER - PART 1
-
LONGEVITY TIGWELD 200EX STICK ARC WELDING 316L STAINLESS TEE JOINT - WELDING TIPS
-
HOBART EZ TIG 165I vs LONGEVITY TIGWELD 200SX HEAD TO HEAD MACHINE CONTROLS COMPARISON REVIEW PART 1
-
HOBART EZ TIG 165i VS LONGEVITY 200EX COMPARISON REVIEW
-
ALUMINUM TEE MULTIPASS USING PULSE TIG WELDING - TIPS AND TRICKS
-
ALUMINUM TIG CORNER JOINT FILLET WELDING FINISHING WELDS TECHNIQUE TIPS AND TRICKS
-
TIG PULSE WELDING RATE SETTINGS ON ALUMINUM 6061-T6 USING THE LONGEVITY TIGWELD 200 EX
-
GTAW TIG WELDING ALUMINUM FULL PENETRATION BUTT WELD WELDER TIPS AND TRICKS
-
TIG WELDING CARBON STEEL MULTIPASS FILLET WELDS WITH TIGWELD 200 EX
-
CK WORLDWIDE CLEAR GAS SAVER PYREX CUP LENSE ON LONGEVITY 200SX WP-26 TIG TORCH SETUP REVIEW PART 1
-
TIGWELD 200 DX
-
MICROTIG 200 DIGITAL
-
TIGWELD 200 SX SET-UP
-
TIGWELD 160 SX SET-UP
-
TIGWELD 200 EX SET UP
Mig
-
LONGEVITY SPOOL GUN 140 SETUP AND REVIEW
-
LONGEVITY MIGWELD 200S 200AMP 60% DUTY CYCLE MIG STICK/ARC WELDER SETUP REVIEW
-
LONGEVITY MIGWELD 250 MP - PULSE ON PULSE MIG WELDER REVIEW AND SETUP
-
CUSTOM GAS CYLINDER MOUNTING BRACKET PART 2 of 2
-
INTRO TO MIG WELDING TIPS AND TRICKS
-
LONGEVITY MIGWELD 200S 200AMP 60% DUTY CYCLE MIG STICK/ARC WELDER SETUP REVIEW
-
MIG WELDING WITH AND WITHOUT GAS
-
Longevity Force Cut 40D, Migweld 140, M1 Cart Tool Review -EricTheCarGuy
-
LONGEVITY MIGWELD 250 MP - PULSE ON PULSE MIG WELDER REVIEW AND SETUP
-
MIG Welding Basics: Quick & Easy Trailer Ramp Project
-
MIGWELD 200 S STICK DEMO
-
ARCMATE 160D SET-UP
-
MIGWELD 140 VS. HOBART HANDLER PART 2
-
MIGWELD 140 VS. HOBART HANDLER PART 1
Stick
-
LONGEVITY Stickweld 140 140AMP Dual Voltage Portable Stick Welder by Longevity
-
LONGEVITY STICKWELD 140 STL - 140 AMP STICK - TIG WELDER SETUP AND REVIEW
-
LONGEVITY STICKWELD 140 STL - 140 AMP STICK - TIG WELDER SETUP AND REVIEW
-
STICK WELDING BASICS - ARC WELDING EXPLAINED
-
316L STAINLESS STEEL STICK CARBON STEEL OVERLAY WITH STICK ARC WELDER
-
STICK WELDING 316L STAINLESS STEEL WELDING OUTSIDE CORNER JOINT USING LONGEVITY WELDER
-
STICKWELD 250 SET-UP
-
STICKWELD 140 SET UP
Multiprocess
-
MOTORIZED WELDING TURNTABLE - PART 5
-
WELDING TURNTABLE PART 4
-
Longevity Innovator 255i Setup and Review Part 4 Plasma Cutting
-
Longevity Innovator 255i Setup and Review Part 4 Plasma Cutting
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 3 - AC ALUMINUM TIG WELDING
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 2 - TIG WELDING
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY INNOVATOR 255i SETUP & REVIEW PART 1 - STICK
-
LONGEVITY PROMTS 200i MIG TIG STICK 3 IN 1 WELDER SETUP TIPS TRICKS REVIEW
-
LONGEVITY PROMTS 252i 250 AMP MIG - TIG - STICK WELDER 3 in 1 SETUP and REVIEW
-
LONGEVITY PROMTS 200i MIG TIG STICK 3 IN 1 WELDER SETUP TIPS TRICKS REVIEW
-
STICK WELDING WITH THE LONGEVITY MIGWELD 250 MP PULSE ON PULSE MIG AND STICK WELDER
-
PLASMA CUTTING BASICS TIPS AND TRICKS
-
STICK WELDING BASICS- ARC WELDING EXPLAINED
-
WELDMAX 185i 3 in 1 PLASMA, TIG, STICK SETUP REVIEW TIPS AND TRICKS
-
INNOVATOR 255i SETUP REVIEW AND DEMO TIPS AND TRICKS
-
WELDMAX 164i SET-UP
-
PROMTS 200 SET-UP
Plasma
-
FORCECUT 62i Setup and Review
-
LONGEVITY FORCECUT 62i VS THERMAL DYNAMICS CUTMASTER 52 REVIEW PART 2
-
LONGEVITY FORCECUT 62i PLASMA CUTTER SETUP AND REVIEW
-
FORCECUT 40D
-
Longevity ForceCut 42i Review | TIG Time
-
FORCECUT 40D SET-UP
-
FORCECUT 80i PRACTICAL USE
-
FORCECUT 80i SET-UP
-
FORCECUT 40i SET-UP
-
FORCECUT 42i PLASMA CUTTING IN 110V
-
MIGWELD 140 SETUP
-
FORCECUT 42i
Consumables
General
No Videos
Setup
-
TIGWELD 250EX PART 2-TIG
-
TIGWELD 250EX PART 1-STICK
-
OVERHEAD TIG WELDING TECHNIQUES
-
LONGEVITY TIGWELD 200i - 200 AMP DC TIG STICK WELDER REVIEW AND SETUP
-
Longevity Tigweld 200D-Setup & Review (200 AMP DC Tigwelder)
-
Longevity TIGWeld 200SX Review | TIG Time
-
Lincoln Invertec V205-T Vs. Longevity Tigweld 200EX
-
DiResta The Which Blade
-
HOW TO MAKE A COMPRESSOR MANIFOLD
-
TIG WELDING COPPER TIPS AND TRICKS
-
Tig Tungsten Diameters Explained
-
temper plate project video tigweld 200i
-
LONGEVITY TIGWELD 200D SETUP AND REVIEW - 200 AMP DC TIG WELDER
-
MAKING A CUSTOM METAL LAMP SHADE BY WELDING WITH A TIG WELDER - PART 1
-
LONGEVITY TIGWELD 200EX STICK ARC WELDING 316L STAINLESS TEE JOINT - WELDING TIPS
-
HOBART EZ TIG 165i VS LONGEVITY 200EX COMPARISON REVIEW
-
ALUMINUM TEE MULTIPASS USING PULSE TIG WELDING - TIPS AND TRICKS
-
ALUMINUM TIG CORNER JOINT FILLET WELDING FINISHING WELDS TECHNIQUE TIPS AND TRICKS
-
TIG PULSE WELDING RATE SETTINGS ON ALUMINUM 6061-T6 USING THE LONGEVITY TIGWELD 200 EX
-
GTAW TIG WELDING ALUMINUM FULL PENETRATION BUTT WELD WELDER TIPS AND TRICKS
-
TIG WELDING CARBON STEEL MULTIPASS FILLET WELDS WITH TIGWELD 200 EX
-
CK WORLDWIDE CLEAR GAS SAVER PYREX CUP LENSE ON LONGEVITY 200SX WP-26 TIG TORCH SETUP REVIEW PART 1
-
MICROTIG 200 DIGITAL
-
TIGWELD 200 SX SET-UP
-
TIGWELD 160 SX SET-UP
-
TIGWELD 200 EX SET UP
This product can expose you to chemicals including Formaldehyde (gas), which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov
-
-
-
-
-
-
-
-
- MIG WELDING GLOVES, WELDING-ARMOR M04 (Medium) Reinforced Leather, Extreme Comfort, Maximum Protection$19.99
-
-